Comparision logic

compare n1 and n2 if n1<n2 set lsb of 2F,n1>n2 set msb of 2F,n1=n2 clear both
org 00h
mov r0,#40h
mov a,@r0 ;n1 in a
inc r0
mov b,@r0 ;n2 in b
cjne a,b,nxt
clr 7fh
clr 78h
sjmp last
nxt: jc slsb
setb 7fh
clr 78h
slsb:clr 7fh
setb 78h
last:sjmp last
end

Comments

Program to find the cube root of a number

org 0h mov r0,#30h mov a,@r0 mov r1,#00h mov r1,#6 up:inc r3 subb a,r1 jc last mov r2,a mov b,#2 mov a,r1 mul ab mov r1,a mov a,r2 sjmp up last:mov 40h,r3 sjmp $ end

Event Sourcing with CQRS.

The way event sourcing works with CQRS is to have part of the application that models updates as writes to an event log or Kafka topic . This is paired with an event handler that subscribes to the Kafka topic, transforms the event (as required) and writes the materialized view to a read store.

Procedure to enable wireless LAN adapter in vmware!

I have went to find the way in which wlan in Kali Linux could be made listed my airmon-ng command. Most of the videos and posts suggested me that it is necessary to have another wi-fi adapter to have connected to wifi network. But this is not necessary. The procedure to do this is as follows: 1. Download this package in Virtual Machine(Kali linux) " http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2010-06-26-p.tar.bz2" 2.Unzip this package in terminal i.e navigate to place where you have downloaded this file , say desktop then type : cd Desktop for unzip type : tar -jxvf compat-wireless-2010-06-26-p.tar.bz2 3. Navigate into the uncompressed directory and type: i."make unload" (only words within the quotes are the commands) ii."make load" Done! now airmon-ng should have the list of the required devices.

Passion for Programming

Search This Blog